A.C.HUMIDIFICATION ENGINEERS P.LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to A.C.HUMIDIFICATION ENGINEERS P.LTD.
Centrifugal Blower Forward Didw
HUMIDIN's Centrifugal Forward Curved Fans/Blowers consist of Double Inlet Double Width(DIDW) and Single Inlet and Single Width (SISW) configuration. These fans have forward curved impellers with forward curved blades having special profile to give you maximum efficiency at low noise levels. These impellers are statically and dynamically balanced. The fans are suitable for various applications where high volume air displacement is required like air cooling, general ventilation, pressurization, etc., in various commercial processes and various industrial HVAC systems. HUMIDIN's ACFC Series of fans are certified for 'Sound & Air Performance' by AMCA.
DISCERNIBLE FEATURES:
Fan Size(Dia): 180 mm to 1120 mm
Flow rates up to 1700 to 190000 cmh
Pressures up to 100 Pa to 1200 Pa
APPLICATIONS For commercial and industrial ventilation in AHU´s, Evaporative Coolers, other HVAC systems, etc.
Centrifugal Blower Backward Didw
UMIDIN's Centrifugal Backward Curved Fans/Blowers consist of Double Inlet Double Width(DIDW) and Single Inlet and Single Width (SISW) configuration. These fans have backward curved impellers with backward curved blades having special profile to give you maximum efficiency at low noise levels. These impellers are statically and dynamically balanced. The fans are suitable for various applications where high volume air displacement is required like air cooling, general ventilation, pressurization, etc., in various commercial processes and various industrial HVAC systems like Power Plants, Mine Ventilations , Marine Ventilations etc.
DISCERNIBLE FEATURES:
Fan Size(Dia): 500 mm to 2000 mm
Flow rates from 2500 upto 300000 cmh
Pressures from 100 Pa to 5000 Pa
APPLICATIONS
For commercial and industrial ventilation in AHU´s, Evaporative Coolers, other HVAC systems, etc.
Axial Flow Fan Normal
An Axial Flow Fan draws the air into it and discharge it inthe same axial direction, rotating in a round section of duct, to exhaust hot and / or contaminated air from a process or system. HUMIDIN's Axial Flow Fans can be direct driven with the impeller mounted directly on the motor shaft or can be built driven with the impeller mounted on a separate fan shaft and driven by the motor through bells and sheaves. Axial Flow Fans are ideals for movilg large volume of air at low pressures. HUMIDIN's Axial Flow Fan have adjustable pitch Axial Fans statically and dynamically balanced having wide range of applications in various industries through out the world.
Fans are certified for 'Sound & Air Performance' by AMCA. HUMIDIN manufactures Single Stage and Double Stage Axial Flow Fans (Counter-Rotating) based on application like Mine Ventilation, Power Plants etc.
DISCERNIBLE FEATURES:
Fan Size(Dia): 315 mm to 2000 mm
Flow rates up to 320000 cmh
Pressures up to 1800 Pa
APPLICATIONS
Used in industry for providing general ventilation, fume extraction and removal of hot spots. HUMIDIN offers a most economical and efficient installation for industry such as Thermal Power Stations, Fertilizers, Heavy engineering, Chemical, Textile, Food general, Paper, Sugar and Pharmaceuticals etc.
SPECIAL APPLICATION: Axial Flow Fans are also available for Fire Application for the following range:
250℃ for 2 hrs
300℃ for 1 hr
300℃ for 2 hrs
Axial Flow Fan Fire Rated
HUMIDIN'S FANS ARE FIRE RATED FOR 250℃ FOR 2 HOURS AND 300℃ FOR 1 HOUR - WARRINGTON EXOVA CERTIFIED.
An Axial Flow Fan draws the air into it and discharge it inthe same axial direction, rotating in a round section of duct, to exhaust hot and / or contaminated air from a process or system. HUMIDIN's Axial Flow Fans can be direct driven with the impeller mounted directly on the motor shaft or can be built driven with the impeller mounted on a separate fan shaft and driven by the motor through bells and sheaves. Axial Flow Fans are ideals for movilg large volume of air at low pressures. HUMIDIN's Axial Flow Fan have adjustable pitch Axial Fans statically and dynamically balanced having wide range of applications in various industries through out the world. Fans are certified for 'Sound & Air Performance' by AMCA.
HUMIDIN manufactures Single Stage and Double Stage Axial Flow Fans (Counter-Rotating) based on application like Mine Ventilation, Power Plants etc.
DISCERNIBLE FEATURES:
Fan Size(Dia): 315 mm to 2000 mm
Flow rates up to 320000 cmh
Pressures up to 1800 Pa
Available Designs also equip Flame Proof, High Temperature requirements.
Construction : MS/SS aluminium, special alloys
Accessories : Protection Grill, Feet for Horizontol/ Vertical Position, Flexible Connection, Silencer, Vanes, etc.
APPLICATIONS Used in industry for providing general ventilation, fume extraction and removal of hot spots. HUMIDIN offers a most economical and efficient installation for industry such as Thermal Power Stations, Fertilizers, Heavy engineering, Chemical, Textile, Food general, Paper, Sugar and Pharmaceuticals etc.
SPECIAL APPLICATION:
Axial Flow Fans are also available for Fire Application for the following range:
250℃ for 2 hrs
300℃ for 1 hr
300℃ for 2 hrs
Air Washer
HUMIDIN evaporative coolers are available with two types i.e. Single Skin and Double Skin.The corner sheet metal is of cast iron with no insulation while double skin has PVC with Puf insulation that´s CFC free. Working Principle.
A natural and energy-efficient means of cooling can be provided by evaporating water into air, specially, in low-humidity areas. This very principal is used in the evaporative coolers, i.e. cooling outdoor air by passing it over water-saturated pads, causing the water to evaporate into it. The 15��40�F-cooler air is then directed into the required space, and pushes warmer air out through the given vents.
While its operation, vents are opened part way to allow warm indoor air to escape as it is replaced by cooled air. I contrast to central air conditioning systems that recirculate the same air; evaporative coolers provide a steady stream of fresh air into the required space.
Evaporative coolers cost about one-half as much to install as central air conditioners and use about one-quarter as much energy.
DISCERNIBLE FEATURES:
Panels designed by special software
Standard pre-filters & proper accessibility
Cellulose pads of imported origin
Water tanks with anti-corrosive coatings
'AMCA' certified 'HUMIDIN' made fans
Standard optional accessories
APPLICATIONS
All the low humidity areas can undoubtedly be served more efficiently by 'Evaporative Coolers'.
Roof Extractor
The Roof Extractor is a motor driven fan unit having cast aluminum alloy impeller, aero foil section blades and is provided with durable weather proof exhaust cowl.
DISCERNIBLE FEATURES:
Fan Size: 500 to 1200 mm
Flow rates up to 100000 cmh
Pressures up to 600 Pa
APPLICATIONS
Ideal for extraction or air supply through roofs/ridges in industrial buildings, factories, power plants, steel plants, foundries, etc.
Bifurcated Fan
Bifurcated Axial Fans are used to keep the motor out of air stream because of the high air/gas/fumes temperatures. Bifurcated Fans are direct driven axial fans where the motor is encased in a central pod to isolate from the flow of air. Bifurcated Fans are ideal for exhausting or re circulating fumes, gases and hot air upto 80�C to 200�C continious operation.
The Bifurcated Fan have following advantages:
High Temperature Ratings
Isolation of motor from heat or contaminants in the air stream.
Easy to maintain
DISCERNIBLE FEATURES:
Fan Size: 315 to 1200 mm
Flow rates up to 100000 cmh
Pressures up to 600 Pa
APPLICATIONS
This fan is mostly placed to exhaust or supply the air of corrosive or hazardous nature. The motor is not in the airflow stream, it thus prevents the hazardous particles available in air.
Jet Fan
HUMIDIN Induced Jet Fan is a special designed fan to achieve high impulse throw of discharging air. It consists of an attenuator at the suction and discharge site, pre-designed inlet and outlet guide vanes. The fan units are of high efficiency.
All Jet Fans are built with the high quality assurance and verified using advanced test equipment.
HUMIDIN Induced Jet Fans with volume flow rate up to 1200 CMH and a throw distance of 35m attenuator at the suction and discharge site, well spun inlet and outlet venturi for laminar flow of air pre-designed inlet and outlet guide vane.
Induced Jet Fans add momentum to both air and smoke flow in a vehicle tunnel
WHY HUMIDIN JET FANS ?
No Ducts are required.
CFD(Computational Fluid Dynamics) analysis by HUMIDIN, is utilised to decide the number and location of Jetfans for effective and optimum performance.
Only Fresh Air Fans, Exhaust Air Fans and Jet Fans required.
Improved air quality and efficient Operation.
Flexibility in installation,quicker installation
Effective smoke management
Optimum use of Car Park Space & Optimisation of Head room for Vehicles and Pedestrians.
Spunned inlet and outlet venturi for more efficient and for low noise operation.
Designed for almost no swirl zone.
APPLICATIONS
For commercial and industrial ventilation in AHU´s, Evaporative Coolers, other HVAC systems, etc.
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
